BRUSH TYPE GELCOAT APPLICATION

Brush type applications, such as marble, translucent polyester gelcoat gelcoat is not used, because each side brush that is homogeneous with the same thickness of a gelcoat film can be derived. Therefore, the parts are thicker than gelcoat more dirty, thin sections also to be more open brush marks are clearly visible. Such a product will look aesthetically very bad gelcoat by brush type, transparent applications used.
1-Color gelcoat applications in two stages - two times applies.
2 to 1 kg in the 50-75 gr Polijel jelkota light colors, dark colors are mixed thoroughly add 30-40 gr Polipigment cake.
3 - Poliya'nın that contain all gelcoats * accelerator only with additional color gelcoat hardener is ready to implement.
4 - For this jelkota 10-15 gr. MEK-peroxide are added to mix.
5 - Her m2 facing the 450-550 grams or mold release wax mold is pulled plowed. The first floor is expected to jelkotun hardening.
6 - Jelkotun hard to become clean with your finger for 30 seconds jelkotun hard control over press, if your hand does not come gelcoat Tableware 2.KAT jelkotu can take.
7 - second floor, one floor more jelkotta pigment cake must use their money, otherwise you can not provide a sufficient covering. The amount of time on the second floor or first floor you will need to be gelcoat.
8 - The gelcoat finish on the casting can then hardened.
* F-254 and Polijel accelerator Polijel F-291 does not include.